OSA Examples
Real screenshots. Those from the module shown are activated with a code (free 30-day trial available).
Workspace
Electronic load, power supply, multimeter and oscilloscope at once, each with its plot.
Readings panel
The readings you choose, large and with min and max, readable from across the bench.
Oscilloscope
Live screen, measurements, cursors, FFT and full-memory capture.
Power supply
Setpoint, limit and output per channel, with its plot and protections.
Multimeter
Function, range and NPLC, large reading and logging with statistics.
Data acquisition
34970A/34972A/DAQ6510 systems: channel by channel, single or continuous scan.
FFT analyzer
Noise density in V/√Hz with logarithmic sweep, integrated noise and references.
Sequencer
Automated tests with steps, conditions, limit monitoring and a report.
Characterize a supply
Load and line regulation, efficiency and load transient.
Efficiency map
Converter efficiency over the whole Vin × Iout range.
PSRR
Input ripple rejection of an LDO, with coherent averaging and the measurement limit marked.
Output noise
Density in V/√Hz and integrated noise from 10 Hz to 100 kHz, floor subtracted.
Report for your customer
All results in a PDF with your logo and the calibrated instruments used.
Bode plot
Gain and phase with a generator and a scope: phase and gain margins.
I-V curves
Diodes, LEDs, zeners and solar panels with an SMU, supply or electronic load.
Conducted EMC
Conducted emissions pre-test with a LISN and an analyzer, quasi-peak and average.
Production bench
Test by serial number with a barcode reader, statistics and labels.
Battery test
Capacity, energy and internal resistance on discharge and charge.
Lab notebook
Notes, screenshots and readings in a PDF with your header.